Glass Door Hardware Manufacturer & Supplier · China

Glass Door Hardware: Floor Springs, Door Closers, Patch Fittings, Pull Handles and Locks – A Buyer's Guide from the Factory

Glass door hardware is the set of fittings that hangs, controls, opens and locks a frameless tempered glass door: a floor spring or pivot with top and bottom patch fittings, a door closer where a floor spring cannot be used, pull handles, glass door locks and flush bolts. HIPAD makes floor springs for doors of 75–250 kg and up to 1500 × 2600 mm, door closers for 25–110 kg doors, patch fittings and stainless steel pull handles up to 1850 mm long. Glass processors, door contractors and distributors in 60+ countries buy complete door sets or single parts from our factory.

Floor springs 75–250 kg
Door closers 25–110 kg
Patch fittings · pivots
Pull handles 300–1850 mm
Glass door locks · flush bolts
10–12 mm tempered glass

Request Glass Door Hardware Catalog See the Parts of a Glass Door

HIPAD glass door hardware: floor springs, door closers, patch fittings and pivots

What Is Glass Door Hardware?

A frameless glass door is a single sheet of tempered glass with no frame. Because the glass cannot be screwed into, every fitting clamps onto it. The most common commercial set uses a floor spring set in the floor under the door: a bottom patch fitting on the lower corner of the glass sits on the floor spring spindle, and a top patch fitting turns on a top pivot in the transom or ceiling. A pull handle goes through holes in the glass, and a lock patch or floor lock secures the door.

Where the floor cannot be cut, a door closer or a concealed frameless closer does the closing instead. The same hardware is used on shop fronts, office entrances, hotel lobbies, glass partitions and bathroom doors. In Spanish the floor spring is a bisagra hidráulica de piso veya freno hidráulico, patch fittings are zapatas veya herrajes para puerta de vidrio templado, and the door closer is a cierrapuertas.

HIPAD Glass Door Hardware: Key Facts

Üretici: HIPAD, Qingdao, Çin; 2000 yılında kuruldu
Floor springs: 12 models, doors 75–250 kg and up to 1500 × 2600 mm, two-stage speed control
Door closers: 25–110 kg doors, surface and concealed, hold-open or non-hold-open
Frameless glass closer: 100 kg, door width up to 1000 mm, 8–13 mm glass, no floor cut
Patch fittings: top, bottom, L-corner and lock patches; 15 mm and 11.8 mm spindle inserts
Handles: SUS304 / SUS201 pull handles for 8–12 mm glass, 300–1850 mm
Sipariş Verme: numuneler 5–7 gün · üretim 20–25 iş günü · FOB Qingdao

Parts of a glass door

The Parts of a Frameless Glass Door

The drawing shows a single frameless glass door on a floor spring. Each numbered part links to the HIPAD range that supplies it.

Single frameless glass door on a floor spring. Not to scale.

#	Part	Job	HIPAD range
1	Top pivot	Upper pivot point, fixed in the transom or ceiling	Door controls
2	Top patch fitting	Clamps the top corner of the glass to the pivot	Patch fittings
3	Bottom patch fitting	Clamps the bottom corner and sits on the floor spring spindle	Patch fittings
4	Floor spring	Carries the door weight and closes it at a controlled speed	Floor springs
5	Çekme kolu	Back-to-back handle through holes in the glass	Glass door handles
6	Lock patch or glass door lock	Locks the door to the floor or the next leaf	Kilitler
7	Flush bolt or door stop	Holds the second leaf of a double door; stops the swing	Gömme sürgüler

HIPAD cam kapı donanımı ürün grupları

Glass Door Hardware from Our Factory

Each range has its own page with models and specifications. Order a complete door set or single components.

Hydraulic floor spring with stainless steel cover plate

Control

Zemin Yayları

Hydraulic floor springs for glass, timber and uPVC doors, 75–250 kg, two-stage speed control.

Surface-mounted hydraulic door closer with arm

Control

Kapı Kapatıcılar

Surface and concealed closers for 25–110 kg doors, with or without 90° hold-open.

Stainless steel patch fittings for frameless glass doors

Fix glass

Patch Fittings & Pivots

Top, bottom, corner and lock patches with top pivots for floor spring glass doors.

Open

Cam Kapı Çekme Kolları

SUS304 / SUS201 back-to-back pull handles for 8–12 mm glass, 300–1200 mm.

Stainless steel ladder pull handle for entrance doors

Open

Stainless Steel Entrance Handles

Heavy-duty commercial pulls 600–1500 mm for 35–70 mm doors, ladder, H-type and round tube.

Kilit

Glass Door & Door Locks

Center locks for single and double glass doors, mortise locks and cylinders.

Kilit

Gömme sürgüler

Standard, concealed and heavy-duty flush bolts, 150–400 mm, for the fixed leaf of double doors.

Fix glass

Glass Fittings & Connectors

Standoffs, point fixings and connectors for sidelights, fixed panels and canopies.

Step 1 · How the door closes

Floor Spring vs Door Closer vs Pivot vs Concealed Glass Door Closer

Kısa cevap: use a floor spring for heavy, busy frameless glass entrances where the floor can be cut; a surface door closer for framed, timber and steel doors; a pivot system for oversized or architectural doors; and a concealed frameless glass door closer when the floor cannot be cut and the glass door is up to 100 kg.

	Floor spring	Door closer	Pivot system	Concealed glass door closer
Where it sits	In a pocket in the floor	On the door face or frame head	Floor and head pivots	Inside the bottom patch, no floor pocket
HIPAD door weight	75–250 kg	25–110 kg	Large doors, up to about 200 kg	Up to 100 kg
Door width	Up to 1500 mm	Up to about 1300 mm	Project-specific	Up to 1000 mm
Swing	Single or double action	Single action	Single or double action	150° each way
Look	Hidden; only a cover plate shows	Visible arm and body	Almost invisible	Hidden in the patch
En uygun olduğu durumlar	Shop fronts, malls, office entrances	Interior, fire and service doors	Feature entrances, villas	Renovations, bathrooms, offices

Step 2 · Floor spring size

How to Choose a Floor Spring by Door Weight and Size

Choose a floor spring whose maximum door weight ve maximum leaf size both cover your door. Tempered glass weighs about 1 milimetre başına 2,5 kg/m²: a 1000 × 2400 mm door in 12 mm glass weighs about 72 kg before fittings, so a 100–120 kg floor spring leaves a safe margin.

All HIPAD floor springs have two-stage speed control: one valve for the closing swing, one for the final latching.
They suit single and double doors in glass, timber and uPVC.
Check the floor depth: floor spring boxes are about 42–70 mm deep.

HIPAD floor spring range: 12 models. Each model's exact ratings and box size are on its drawing.
Max door weight	Max door leaf (W × H)	Tipik kullanım
75 kg	750 × 2100 mm	Light interior glass doors
95–100 kg	950–1000 × 2100–2200 mm	Office and bathroom glass doors
120–135 kg	1100–1200 × 2200–2500 mm	Shop fronts, hotel doors
150 kg	1200 × 2300–2400 mm	Busy commercial entrances
180–200 kg	1500 × 2200–2500 mm	Large entrance doors
250 kg	1500 × 2600 mm	Oversized and heavy doors

Step 3 · Door closer size

How to Choose a Door Closer

Door closers are sized by door weight and width. HIPAD surface closers cover doors from 25 to 110 kg in square, round and triangular bodies, and concealed closers cover 35–95 kg doors. Most models are available with or without 90° hold-open.

Finishes: brushed, titanium, red bronze, green bronze and black.
Door weight	Typical door width	HIPAD closer type
25–45 kg	Up to about 1000 mm	Compact square or round closer
45–65 kg	Up to about 1200 mm	Standard square or round closer
60–80 kg	Up to about 1300 mm	Large square or round closer
80–110 kg	Up to about 1000 × 2000 mm leaves	Heavy-duty triangular closer
35–95 kg	Up to about 1300 mm	Concealed closer

EN 1154 closer sizes (reference)

Many specifications in Europe and the Middle East call for closers by EN 1154 power size. Match the HIPAD model to the size the specification asks for.

EN size	Max door width	Door weight
EN 2	850 mm	Up to 40 kg
EN 3	950 mm	En fazla 60 kg
EN 4	1100 mm	En fazla 80 kg
EN 5	1250 mm	Up to 100 kg
EN 6	1400 mm	En fazla 120 kg

No floor cut

Concealed Frameless Glass Door Closer

For renovations, offices and bathrooms where the floor cannot be opened, HIPAD supplies a frameless glass door closer built into the bottom fitting. It needs no floor pocket and no embedding work.

Door weight	Up to 100 kg
Door width	Up to 1000 mm
Cam	8–13 mm tempered
Opening	150° each way; 90° hold-open optional
Speed	Closing zone 150°–10°, latching zone 10°–0°
Ayarlama	Base ±3 mm front-back and side-to-side, ±4° rotation
Kurulum	No floor recess, no embedding

Fix the glass

Yama Bağlantı Parçaları

Patch fittings clamp the corners of a frameless glass door and connect it to the floor spring and top pivot. A standard top or bottom patch measures about 164 × 51 × 32 mm.

Patch	Job
Bottom patch	Sits on the floor spring spindle
Top patch	Turns on the top pivot
L-corner patch	Joins a fixed sidelight and fanlight at the corner
Lock patch	Holds a floor lock or keeps for double doors

Spindle inserts are available for 15 mm and 11.8 mm floor spring spindles, which covers the most common floor springs on the market. Tell us which floor spring the door uses.

Step 4 · Handles and locks

Glass Door Handles, Locks and Flush Bolts

Round tube Φ25–38 mm or rectangular tube; chrome, satin, black and titanium black finishes.
Kolu	Kapı	Uzunluk	Malzeme
Back-to-back glass pull	8-12 mm cam	300-1200 mm	SUS304 / SUS201
Heavy-duty entrance pull	35–70 mm doors	600-1500 mm	SUS304
Long pull with lock	Glass and entrance doors	Up to 1850 mm	Paslanmaz çelik
Sliding back-to-back pull	10–40 mm doors	200-800 mm	Paslanmaz çelik

Specify a pull handle by overall length, center-to-center hole distance, tube size, projection and glass thickness. See the back-to-back handle guide.

Lock or bolt	Kullanım
Glass door center lock	Single or double glass doors, locks leaf to leaf
Lock patch / floor lock	Locks the bottom of the glass door to the floor
Mortise lock	Framed doors; brass, zinc alloy, iron or stainless bodies
Standard flush bolt	Fixed leaf of interior double doors, 150–300 mm
Concealed flush bolt	Hidden in the door edge, 200–350 mm
Heavy-duty flush bolt	Commercial double doors, 250–400 mm

Sipariş Verme

Hardware List for a Frameless Glass Door

Typical list for a floor spring door. With a concealed glass door closer, replace the floor spring and bottom patch with the closer unit.
Part	Single door	Double door
Floor spring	1	2
Bottom patch	1	2
Top patch	1	2
Top pivot or transom patch	1	2
Pull handle (pair)	1	2
Lock patch, floor lock or center lock	1	1 center lock
L-corner patches (with sidelights and fanlight)	As needed	As needed

Glass and Finish

Kullanım 10–12 mm tempered glass for entrance doors; 12 mm is standard for busy commercial doors.
All holes and notches for patches, handles and locks must be cut tavlamadan önce, to the hardware drawing.
Choose stainless steel covers and handles in one finish: chrome, satin, black or titanium black.
Near the sea or pools, specify SUS304 handles and stainless fixings.

Frameless glass entrance door with patch fittings

Glass Door Hardware by Application

Commercial Entrances

Floor springs, patch fittings, long pull handles and locks for shop fronts, malls and office lobbies.

Office & Interior Glass Doors

Patch fittings, concealed glass door closers and pull handles for meeting rooms and partitions.

Glass door with stainless steel pull handle

Bathroom & Residential Glass Doors

Pull handles, knobs and frameless closers for bathroom and residential glass doors.

Project references: shopping center glass doors, Los Angeles, USA, office glass door system, Singapore ve apartment glass doors, Vancouver, Canada.

Kurulum Genel Bakış

Confirm the door size, glass thickness and hardware set, and send the hardware drawing to the glass processor before tempering.
Set the floor spring box in the floor, level and in line with the top pivot; grout it in place.
Fix the top pivot in the transom or ceiling directly above the floor spring spindle.
Fit the patch fittings to the glass with their gaskets, then hang the door on the spindle and pivot.
Adjust the closing and latching speeds, then fit the handle, lock and cover plates.

Glass door hardware should be installed by a qualified glazier or door installer.

Common Problems and Fixes

Sorun	Düzelt
Door slams	Reduce the closing and latching speed on the valves
Door does not close fully	Increase the latching speed; check the door is plumb
Door sags or rubs	Check the top pivot is directly above the spindle; re-tighten patches
Oil on the cover plate	Floor spring seal failure; replace the unit
Handle loose on the glass	Replace the gaskets and re-tighten the through-bolts

Neden HIPAD’dan satın almalısınız?

Glass Door Hardware from One Factory

HIPAD started in 2000 with bearings and precision motion parts and today supplies a complete door and glass hardware range. Floor springs, closers, patch fittings, handles and locks are produced and checked under one quality system, so a glass processor or contractor can source a complete door set in one finish from one supplier.

12floor spring models, 75–250 kg

25–110 kgdoor closer range

2000+hızlı özelleştirme için kalıp setleri

60+tedarik edilen ülkeler

Kalite kontrolü

Material and dimension checks of bodies, spindles, patches and handles
Closing and latching function checks on floor springs and closers
Fit checks of patches and handles on sample glass
Finish inspection and export packing checks

HIPAD is ISO 9001 onaylıdır ve ilgili ürünler CE, GS ve CSA C-UL certification. SGS or BV third-party inspection is available.

OEM / ODM glass door hardware

Complete door sets matched in one finish
Handle lengths, hole centers and finishes to your drawing
Logo on cover plates and handles, private-label packing, küçük miktarlar için bile
Packing per door for projects, or bulk for distributors

1. Door schedule	Send door sizes, glass thickness, quantity and finish
2. Örnekler	5–7 days for existing models
3. Üretim	20–25 iş günü
4. Sevkiyat	Qingdao veya Çin'deki herhangi bir limanda FOB · peşinat, sevkiyattan önce

Glass door guides

More Guides on Glass Door Hardware

Door Closer Weight Capacity and Opening AngleCloser, floor spring and pivot compared
Pivot Kapı Sistemi: Ağırlık ve Açılma KılavuzuLarge doors and structural checks
Çift Taraflı Kapı Kolları: Cam Kapı Teknik Özellik KılavuzuLength, centers and projection
Commercial Door Pull Handle: Dimensions GuideEntrance handle sizes and approvals
Cam Kapı Kolu Tedarikçisi: B2B Satın Alma RehberiWhat to send for a correct quote
Concealed Flush Bolt: Size and Material GuideLengths, materials and fitting
Cam Donanımı: B2B Tedarikçi ve Spesifikasyon KılavuzuDoor, sliding, clamp and railing hardware
Ticari Giriş ÇözümleriComplete entrance hardware approach

Glass Door Hardware Terms

Dönem	Anlamı	Diğer adıyla
Floor spring	Hydraulic closer set in the floor under a door	Floor hinge, floor closer, bisagra hidráulica de piso, freno hidráulico
Patch fitting	Clamp that fixes a hinge point to the corner of glass	Glass door patch, zapata
Top pivot	Upper pivot point of a floor spring door	Top centre, pivote superior
Çift etkili	Door swings both ways	Double swing
Hold-open	Door stays open at a set angle	Dead stop, 90° stop
Latching speed	Speed over the last few degrees of closing	Latch zone
Flush bolt	Bolt in the edge of the fixed leaf of a double door	Edge bolt
Door closer	Surface or concealed device that closes a door	Cierrapuertas

Glass Door Hardware FAQ

Çerçevesiz cam kapı için hangi donanımlar gerekir?

Zemin yaylı çerçevesiz bir cam kapı için zemin yayı, alt cam bağlantı parçası, üst pivotlu üst cam bağlantı parçası, çekme kolu ve kilit cam bağlantı parçası, zemin kilidi veya merkez kilidi gerekir. Çift kapılar için her kanat için bir set ve genellikle bir merkez kilidi gerekir.

Zemin yayı ile kapı kapatıcısı arasındaki fark nedir?

Zemin yayı, kapının altındaki zemine yerleştirilir ve kapının ağırlığını taşır; bu nedenle ağır çerçevesiz cam kapılar için uygundur ve neredeyse görünmezdir. Kapı kapatıcısı ise kapıya veya kasanın üst kısmına sabitlenir ve yalnızca kapıyı kapatır; bu nedenle çerçeveli, ahşap ve çelik kapılar için uygundur.

Zemin yayı boyutunu nasıl seçerim?

Maksimum kapı ağırlığı ve maksimum kanat ölçüsü kapınıza uygun olan bir zemin yayı seçin. HIPAD zemin yayları, 750 × 2100 mm kapılar için 75 kg'dan 1500 × 2600 mm kapılar için 250 kg'a kadar çeşitlilik gösterir.

Zemini kesmeden bir cam kapı otomatik olarak kapanabilir mi?

Evet. Gizli çerçevesiz cam kapı kapatıcısı alt bağlantı parçasının içine yerleştirilir ve zeminde yuva gerektirmez. HIPAD'ın modeli, 8–13 mm camda 100 kg'a ve 1000 mm genişliğe kadar olan kapıları her iki yöne 150° açılacak şekilde destekler.

Cam kapılarda hangi cam kalınlığı kullanılır?

Ticari çerçevesiz cam kapılarda normalde 10–12 mm temperli cam kullanılır; yoğun girişlerde 12 mm yaygındır. Tüm delikler ve çentikler, cam temperlenmeden önce açılmalıdır.

Cam kapı çekme kollarınız hangi ölçülerde mevcuttur?

Karşılıklı cam çekme kolları, SUS304 veya SUS201 malzemeden, 8–12 mm cam için 300–1200 mm uzunluklarda sunulur. Ağır hizmet tipi giriş kolları, 35–70 mm kapılar için 600–1500 mm uzunluklarda; kilitli uzun kollar ise 1850 mm'ye kadar mevcuttur.

Cam bağlantı parçalarınız zemin yaylarımıza uygun mu?

HIPAD cam kapı bağlantı elemanları, en yaygın zemin yaylarını kapsayan 15 mm ve 11,8 mm zemin yayı milleri için mil adaptörleriyle sunulur. Zemin yayı modelini bize bildirin, adaptörü onaylayalım.

Komple bir cam kapı donanım seti tedarik edebilir misiniz?

Evet. Projeler için kapı başına paketlenmiş veya distribütörler için toplu olarak, tek bir yüzey seçeneğinde zemin yayları, cam bağlantı parçaları, pivotlar, kollar, kilitler ve sürgü kilitler tedarik ediyoruz; logolu ve özel markalı ambalaj seçenekleri de mevcuttur.

HIPAD bir üretici mi yoksa ticaret şirketi mi?

HIPAD, 2000 yılında Çin'in Qingdao kentinde kurulmuş, kendi kalıpları ve kalite kontrolüyle kapı, pencere ve cam donanımları üreten bir üreticidir. HIPAD, ISO 9001 sertifikalıdır. İhracat işlemlerini Qingdao Hipad International Trade Co., Ltd. yürütmektedir.

Son güncelleme: Ekim 2026 · İnceleyen: Allen, Teknik Mühendis, HIPAD

İlgili Donanımlar

Sürme Kapı Donanımları Glass railing hardware

Cam Korkuluk Donanımı Cam kıskaçları

Cam kelepçeleri Paslanmaz çelik kapı menteşeleri

Kapı Menteşeleri

Send Your Glass Door Hardware Requirements To HIPAD

Neden Bizi Seçmelisiniz?

A door and glass hardware factory since 2000, supplying glass processors, door contractors, distributors and developers in 60+ countries. Our commitment includes:

ISO 9001 sertifikalı; ilgili ürünler için CE, GS ve CSA C-UL sertifikaları; SGS / BV denetim hizmeti mevcuttur
Floor springs, closers, patch fittings, handles and locks from one factory, in one finish
Numuneler 5–7 gün içinde, seri üretim 20–25 iş günü içinde
OEM / ODM: lengths, finishes, logo and per-door packing, even for small quantities

Send your door sizes, glass thickness, quantity and finish. We reply within 24 hours with a hardware list and a factory price.

Fiyat Teklifi Alın

Teklif Alın

24 saat içinde yanıt vereceğiz. Acil talepleriniz için WhatsApp/WeChat üzerinden +86 137 9191 8989 numarasından bize ulaşabilir veya aynı numarayı doğrudan arayabilirsiniz.

*Gizliliğinize saygı duyuyor ve tüm bilgilerinizi koruyoruz.

Bilgilerinizi yalnızca talebinize yanıt vermek için kullanırız; izniniz olmadan e-posta veya tanıtım mesajı göndermeyiz.